How to Make Resin Jewelry featuring Piddix Images and SuperClear Resin

October 7, 2013
A heart-shaped bezel and Piddix image of music notes is featured in this cast resin necklace: Music Lover Necklace by Valorie Nygaard-Pouzar of www.rings-things.com

“Music Lover Necklace” by Valorie Nygaard-Pouzar features SuperClear Resin, a Piddix image, and an Amate heart-shaped bezel.

Resin jewelry is a great way to encapsulate an image; you can seal a Piddix image or even a photocopy of a cherished family photo under SuperClear resin. To get started just follow these step-by-step instructions.

Why we love SuperClear Resin:

  • non-toxic formula
  • crystal clear jewelry-grade formula with UV protectant to prevent yellowing
  • bubbles easily dissipate
  • low to no odor
  • 20 minute working time
  • 6-8 hour cure time at room temperature
  • no shipping restrictions — This resin can be shipped worldwide!
Free tutorial from www.rings-things.com - tools and supplies needed to make a Super Clear Resin and Bezel pendant featuring Piddix images.

Step 1: Gather the tools and supplies necessary to make your SuperClear Resin pendant.

You will need these tools and supplies:

Jewelry making tutorial: how to make a clear resin image pendant from www.rings-things.com. Cutting out the Piddix image.

Step 2: Cut out the image to match the size of the bezel’s interior opening.

Jewelry making tutorial: how to make a clear resin image pendant from www.rings-things.com. Adding the image to the bezel.

Step 3: Place the image into the bezel; it should fit snugly. If desired, you can glue the image in place with a water-based adhesive such as “The Ultimate!” glue; the same glue can be used to seal the image by painting a thin layer over the image. Allow to dry thoroughly.

Jewelry making tutorial: how to make a clear resin image pendant from www.rings-things.com. Measuring the resin.

Step 4: Use the calibrated cups to measure the resin and hardener according to the manufacturer’s instructions: mix 2 parts of resin (part A) to 1 part of hardener (part B).

Jewelry making tutorial: how to make a clear resin image pendant from www.rings-things.com -- measuring and mixing the resin.

Step 5: Gradually combine the hardener and resin in a disposable plastic cup.

Jewelry making tutorial: how to make a clear resin image pendant from www.rings-things.com -- stirring the resin.

Step 6: Mix by “folding” the resin and hardener together for two minutes; scrape the sides of the cup as you mix.

Jewelry making tutorial: how to make a clear resin image pendant from www.rings-things.com -- mixing SuperClear resin.

Step 7: Let the mixed resin “rest” for five minutes.

Jewelry making tutorial: how to make a clear resin image pendant from www.rings-things.com. Pour the resin into the bezel.

Step 8: Pour the resin slowly into your prepared bezel. Add resin until the bezel is full and is gently domed. Working on a small elevated work surface makes it easy to pivot and move the piece.

Jewelry making tutorial: how to make a clear resin image pendant from www.rings-things.com. Use a flame to rapidly raise bubbles to the surface.

Step 9: To aid in the dissipation of air bubbles, carefully hold a lit lighter above the surface of the resin; bubbles will quickly rise to the surface and burst. Once the resin is clear, set the pendant aside on a level surface and cover with an inverted container to prevent dust from settling on the resin. Allow to dry for approximately eight hours at room temperature.

If you would like to make the “Music Lover” Necklace, a list of the exact parts used can be found in the Rings & Things Design Gallery. For other resin jewelry tutorials, check out the Jewelry Design Gallery.

Make things!

Mollie

Print Friendly, PDF & Email

You Might Also Like

1 Comment

  • Reply Diane Livingston December 30, 2017 at 3:07 pm

    Also heard if you warm the resin first it helps to not get bubbles. Don’t know haven’t tried myself.

  • Leave a Reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.