How to Make an Adjustable Wire Bangle Bracelet

July 9, 2014

I love the charm-adorned “Alex & Ani” style adjustable wire bracelets that have been gaining popularity, and of course wanted to make my own version. For ease, I chose to fabricate my bracelet from Memory Wire. Memory Wire is made of durable stainless steel, and comes in the perfect round bracelet shape and the additional wire forming can be easily made with Memory Wire bending pliers. An added benefit to using Memory Wire is it can be adorned with colorful beads from Toho Seed Bead Cocktail Mixes. Here are the step-by-step instructions to make my “Happy Octopus” Adjustable Wire Bangle Bracelet.

Jewelry making supplies you will need to make an adjustable bangle bracelet.

Gather together the supplies you will need to make the “Happy Octopus” Alex and Ani Style Expandable Bangle Bracelet.

You will need these supplies:

    • 1 Pkg Memory Wire (use 10″ of #61-167 Anklet-Size Stainless Steel)

TIP: Get all the above in our Happy Octopus Adjustable Wire Bangle Bracelet Making Kit!

And these tools:

Now follow these steps to make your bracelet:

How to make an expandable bangle bracelet: Use the memory-wire bending pliers to form an outward facing loop on one end.

Step 1: Use the memory-wire bending pliers to form an outward-facing loop on one end.

How to make an expandable bangle bracelet with wire and beads.

Step 2: Grasp the loop with flat-nose pliers and make a 90-degree bend.

How to make an expandable bangle bracelet from memory wire and TOHO seed beads

Step 3: String one 3mm round corrugated metal bead on the wire; this bead is sized larger than the end loop and will hold the beads in place. String the TOHO beads randomly or in your desired pattern (approximately 6 inches). End with a second 3mm corrugated metal bead. You now have approx. 6 inches of beaded wire and approx. 1-3/4 inches of overlapping blank wire.

How to add charms to a wire bangle bracelet.

Step 4: Add jump rings to each of the charm adornments. Follow the instructions for opening and closing jump rings in Rings & Things’ “Jewelry Basics 101” Technique Sheet.

How to make an expandable bangle bracelet with charms.

Step 5: On the bracelet, use heavy-duty cutters to cut the unfinished end of memory wire 1/2 inch beyond the 1-3/4 inches of overlapping blank wire. String the cut end through the first memory-wire loop. String the two charms onto the open wire end. Use the memory-wire bending pliers to form an inward-facing loop on the unfinished end, leaving the loop slightly open.

How to make an expandable wire bangle bracelet.

Step 6: Grasp the loop with flat-nose pliers and make a 90-degree bend that faces the opposite direction of the first loop. Link the loop over the bracelet wire and close the loop.

How to open and close an expandable wire bracelet.

Step 7: To open the bracelet, grasp the two 3mm corrugated metal beads and pull the wire to expand the opening. To close the bracelet, gently squeeze the sides.

Expandable Bangle Bracelet Concluding Image

Your finished “Happy Octopus” Alex and Ani Style Expandable Wire Bracelet is ready to enjoy!

Buy this Bracelet Making Kit >>

Make Things! ~ Mollie

Editor’s Note: This blog was originally titled “How to Make an Expandable Wire Bangle Bracelet”

Print Friendly, PDF & Email

You Might Also Like

8 Comments

  • Reply Laura December 3, 2014 at 10:18 am

    Love the colors and uniqueness of this bracelet!

  • Reply G Vu December 15, 2014 at 3:42 am

    Love these! But how do you close the second loop (the loop that you have to leave slightly open when the bangle is finished to slip over the wire)? I’ve managed to make a second loop, but after I slip it over the wire, I can’t close it and have it maintain its nice circle shape. Please email me! Thanks!

  • Reply Mollie December 15, 2014 at 12:30 pm

    Hi G!
    It is true, the memory wire is super sturdy and a little tricky to fully close. I used my flat nose pliers to squeeze the loop closed. Another method to try is to fully form a closed loop with the memory-wire bending pliers, and then twist the loop open to the side, slip the bracelet wire in place and then twist the loop closed (similar to opening and closing a jump ring).
    Hope this helps!
    Mollie

  • Reply Brianne Metzger May 9, 2015 at 6:37 pm

    Wow! This is perfect! Thanks for sharing!

  • Reply quanda January 10, 2016 at 7:20 am

    Thank you very helpful

  • Reply Glo March 19, 2016 at 6:45 pm

    What is the guage of the memory wire that you are ysing. I bought Bead-a-long but it seems thinner than the alex and ani wire.

    • Reply Polly March 21, 2016 at 8:57 am

      Hi Glo,
      Beadalon memory wire is 22 gauge. I believe the Alex and Ani bracelets are closer to 14 gauge but I’m not positive. I’m also not sure exactly what type of material the Alex and Ani bracelets are made of — some metals are too hard to work by hand at 14 gauge. (14 gauge memory wire would break jewelry pliers and cutters.) And some metals, such as copper, need to be work hardened to be springy enough to keep a bracelet shape in 14 gauge. Memory wire is a nice compromise because it is already pre-formed into a bracelet size, and it’s not too hard to make simple loops that also keep their shape. The extra steps required to make these bracelets by hand using most 14-gauge wire available for jewelers and crafters, would make it more a workshop project, rather than a kit or blog project. Another option is the pre-made bracelet blanks: http://www.rings-things.com/Products/Cuffs-Bangles-and-Beadable-Bracelet-Blanks/ that you can then add charms too. But most beads won’t fit on the heavier 14 gauge wire. ~Polly

  • Reply Rachael Maurer June 24, 2021 at 8:44 pm

    Thank you, I look forward to trying this tonight

  • Leave a Reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.