Create a Journal Necklace with Piddix Images

July 24, 2014
Flora & Fauna Journal Style Necklace made with Rings & Things brass "fairy door" blanks and Piddix Collage Sheets.

Flora & Fauna Journal Style Necklace made with Rings & Things brass “fairy door” blanks and Piddix Collage Sheets.

 

Creating a journal necklace is fun and easy using Rings & Things precut brass “fairy door” blanks and Piddix collage sheets.  Just follow these steps:

 

A list of supplies for making a metalworked journal style necklace.

Step 1: Gather the tools and supplies necessary to make a journal necklace. Select your favorites from the many styles of “fairy-door” blanks and Piddix collage sheets

 

You will need the following supplies:

1 set  Brass Sandwich Blanks (Fairy Doors)  (I used #44-721-11: square-with-circle window brass blank)

1 each  Metal-mesh choker  (I used #52-293-16-6: antiqued-brass-plated metal-mesh choker)

5-10 images  Piddix collage sheet  (I used #83-231-01-006: square flora & fauna)

6 each  Crystal Jams™ Assortment  (I used #05-328-04-916: Somebody’s Heartbreak)

6 each  ball-end head pin  (I used #37-091-15-6: 1.5″antiqued-brass-plated ball-end head pin)

2 each  5mm round jump rings  (I used #37-136-6: 5mm round antiqued brass jump rings)

2 each  8mm round jump rings  (I used #37-167-6: 8mm round antiqued brass jump rings)

Oxidizer & Antiquing Solution  ( I used Novacan black patina)

 

And the following tools:

800-1000 grit sanding sponges or polishing paper

polishing cloth

Extra Fine Point Sharpie®

1.25mm round hole punch pliers

Four-piece glitter tool set

Two-hole metal punch

Fine-tip craft scissors

cotton swab

 

How to punch holes in metal with a metal hole punch.

Step 2: Measure and mark the hole position on the brass blanks. The apex of the hole should be positioned 1/8″  from the sides on the top two corners. Punch holes at the marked positions with the two-hole metal punch. Make sure the hole placement on the front and back blanks line up.

 

How to patina a brass jewelry blank with Novacan Black Patina.

Step 3: Prepare the brass blanks for patina by gently sanding with a 3M ultra-fine polishing sponge. Use a cotton swab to apply Novacan black patina to the front and back side of both blanks. Polish the brass blanks to attain the desired shade of patina.

 

How to make a journal necklace with Piddix image sheets.

Step 4: Use fine-point craft scissors to cut out image “pages”. The pages should measure slightly smaller than the size of the brass cover blanks. Five to ten pages per journal works best.

 

How to make a journal necklace with Piddix image sheets, punching holes.

Step 5: Mark and punch holes in the paper image pages. Use the metal blanks as a guide to mark hole position on the upper two corners of each page. Punch holes with a 1.25mm hole punch.

 

How to wire wrap the loop of a Swarovski crystal bicone dangle charm.

Step 6. Make six crystal dangle charms, follow the instructions for making wire-wrapped loops in the Rings & Things Jewelry Basics 101.

 

How to assemble a journal necklace.

Step 7: Assemble the journal pendant by stringing the brass blank back, image pages, and brass blank front onto jump rings. Add three crystal dangle charms on each jump ring and then close the jump rings. String the pendant onto a metal mesh choker. Your necklace is ready to wear.

 

If you enjoy making the “Flora & Fauna” journal-style necklace, try these variations:

 

 

 

 

 

Make Things!

Mollie

Print Friendly

You Might Also Like

No Comments

Leave a Reply