Sweet Sterling Silver Infinity Bracelet

Supplies needed

You will need wire cutters, round nose pliers and chain nose pliers to create this bracelet.

Use the wire cutters to clip the head off the head pins. You could also use 22 gauge sterling silver wire if you have that instead.

Using your round nose pliers make a wrapped loop on one end.

Clip the end of the wire, and use the chain nose pliers to tuck the wire flush so there is nothing sticking out. Then add your bicone crystal bead. I used aquamarine because it is my birthstone.

Make a wrapped loop on the opposite side of the bead. Clip the excess wire and tuck the end down so it is flush.

One completed crystal link.

Repeat with the other head pins and crystal so that you have two links.

Attach one of the links with one of the jump rings.

Attach the other link on the other side of the infinity charm.

Attach the chain using a jump ring to the crystal link.

Cut the chain the for the bracelet. You can hold it around your wrist to see how long you will need it. It will be about 6 inches.

Attach the chain to the to other side using a jump ring.

Cut the chain in the middle so you can add a clasp.

Attach the clasp on the back with a jump ring.